5.15 [01 Save Calibration] Save Parameters and Calibration
This function saves parameters and calibration!
ATTENTION!
After any data modification, activation or calibration, it is compulsory to save avoiding to loose them switching the engine
off. The procedure is shown here below and will be required during calibration procedures that will follow.
PROCEDURES STATUS
IN THE CONTROL AREA
Follow steps in 3.5 paragraph to select and enter the menu parameters
Pressing the
keys, seek the page as shown on the right.
A x.x L x.x W x.x
01 Save Calibration
Press to save. A message will inform that the saving procedure is completed.
DONE!
Press again to return to main menu.
To Next Page
Loading...