5.9 [26 Init Weight] Weight Initialisation
User can use this procedure when all corrections (unload and load) have to be deleted, about the attachment that the
user use actually.
ATTENTION!
Be sure to have confirmed the correct Operative Mode. This Operation completely delete all operations of the Operation
Mode! All values of selected Operative Mode will turn back in default setting situation.
PROCEDURES STATUS
IN THE CONTROL AREA
Follow steps in 3.5 paragraph to select and enter the menu parameters
Pressing the
keys, seek the page as shown on the right.
Press to get in.
A00 S 6.8 W.0
26 INIT WEIGHT
Press to confirm Initialisation = deleting of preceding calibration.
A00 S 6.8 W.0
Esc to Confirm
Press to delete the operation and back at the previous page.
Note!
This procedure saves calibration values automatically.
To Next Page
Loading...
