ABOUT THIS GUIDE
This guide provides information about the Web user interface for the
3Com® Baseline Switch 2924-PWR Plus. The Web interface is a network
management system that allows you to configure, monitor, and
troubleshoot your switch from a remote web browser. The Web interface
web pages are easy-to-use and easy-to-navigate.
User Guide
Overview
This section provides an overview to the User Guide. The User Guide
provides the following sections:
■ Getting Started — Provides introductory information about the
Switch 2924-PWR and how it can be used in your network. It covers
summaries of hardware and software features.
■ Using the 3Com Web Interface — Provides information for using
the Web interface including adding, editing, and deleting device
configuration information.
■ Viewing Basic Settings — provides information for viewing and
configuring essential information required for setting up and
maintaining device settings.
■ Managing Device Security — Provides information for configuring
both system and network security, including traffic control, ACLs, and
device access methods.
■ Managing System Information — Provides information for
configuring general system information including the user-defined
system name, the user-defined system location, and the system
contact person.
■ Configuring Ports — Provides information for configuring port
settings.
■ Aggregating Ports — Provides information for configuring Link
Aggregation which optimizes port usage by linking a group of ports
together to form a single LAG.
To Next Page
Loading...
