CHAPTER 6: CONFIGURING PORTS
96
Speed — Displays the configured rate for the port. The port type
determines what speed setting options are available. Port speeds
can only be configured when auto-negotiation is disabled.
The possible field values are:
10 — Indicates the port is currently operating at 10 Mbps.
100 — Indicates the port is currently operating at 100 Mbps.
1000 — Indicates the port is currently operating at 1000 Mbps.
Auto — Use to automatically configure the port. The actual
speed will show in brackets if the link is up.
The value in the bracket indicates the current operating speed.
Duplex — Displays the port duplex mode. This field is configurable
only when auto-negotiation is disabled. This field cannot be
configured on LAGs. The possible field values are:
Auto — Use to automatically configure the port. The actual
duplex will show in brackets if the link is up.
Full — The interface supports transmission between the device
and its link partner in both directions simultaneously.
Half — The interface supports transmission between the device
and the client in only one direction at a time.
2 Select port to view the port detail.
To Next Page
Loading...
