3Com 3CBLSG48 - Modifying Link Aggregation

CHAPTER 7: AGGREGATING PORTS
100
Summary
Group ID — Displays the Link Aggregated Group ID.
Type — Displays the type of link aggregation for the Group ID.
Member Ports — Displays the ports configured to the LAG.
2 Define the fields.
3 Click Apply. The LAG configuration is defined, and the device
is updated.
The Link Aggregation Modify Page optimizes port usage by linking a
group of ports together to form a single LAG. Aggregating ports
multiplies the bandwidth between the devices, increases port flexibility,
and provides link redundancy.
Monitor users have no access to this page.
To modify Link Aggregation:
1 Click Ports > Link Aggregation > Modify. The Link Aggregation
Modify Page opens.
Figure 48 Link Aggregation Modify Page
Modifying Link
Aggregation