CHAPTER 7: AGGREGATING PORTS
102
The Link Aggregation Remove Page allows the network manager to
remove group IDs containing member ports.
Monitor users have no access to this page.
To remove Link Aggregation:
1 Click Ports > Link Aggregation > Remove. The Link
Aggregation Remove Page opens.
Figure 49 Link Aggregation Remove Page
Removing Link
Aggregation
The Link Aggregation Remove Page includes the following fields:
Select Aggregation(s) to Remove — Displays the Link
Aggregation table. Each row corresponds to a Link Aggregated
Group ID. The fields in the table are:
Group ID — Displays the Link Aggregated Group ID.
Type — Displays the Link Aggregation type.
Member Ports — Displays the ports for which the link
aggregation parameters are defined.
2 Select a group ID to be removed
3 Click Remove. The Link aggregation is removed, and the device is
updated.
To Next Page
Loading...
