CHAPTER 13: CONFIGURING QUALITY OF SERVICE
158
Viewing Bandwidth
Settings
The Bandwidth Summary Page displays bandwidth settings for a
specified interface.
To view Bandwidth Settings:
1 Click Device > QoS > Bandwidth > Summary. The Bandwidth
Summary Page opens.
Figure 86 Bandwidth Summary Page
The Bandwidth Summary Page contains the following fields:
Interface — Displays the interface for which rate limit and shaping
parameters are defined.
Ingress Rate Limit
Status — Indicates if rate limiting is defined on the interface.
The possible field values are:
Enable — Enables ingress rate limiting on the interface.
No Limit — Ingress rate limiting is disabled on the interface.
Rate Limit — Indicates the traffic limit for the port.
To Next Page
Loading...
