CHAPTER 7: AGGREGATING PORTS
103
LAG ports can contain different media types if the ports are operating
at the same speed. Aggregated links can be set up manually or
automatically established by enabling LACP on the relevant links.
Aggregate ports can be linked into link-aggregation port-groups. The
LACP Summary Page contains fields for viewing LACP LAGs.
1 Click Port > LACP > Summary. The LACP Summary Page opens.
Figure 50 LACP Summary Page
Viewing LACP
The LACP Summary Page contains the following fields:
Port — Displays the port number.
Status — Displays the administrative status of the port.
Enabled — LACP is enabled on the port
Disabled — LACP is disabled on the port
Port-Priority — Displays the LACP priority value for the port. The
field range is 0-65535.
State — Displays inactive or active.
Oper Key — Displays the operational key value assigned to the
port by the switch.
To Next Page
Loading...
