3Com 3CBLSG48 - Configuring System Name Information

CHAPTER 5: GENERAL SYSTEM INFORMATION
86
The System Name Page allows the Network Administrator to provide
a user-defined system name, location, and contact information for the
device.
Monitor users have read-only permissions on this page.
To configure the System Name:
1 Click Administration > System Name. The System Name Page
opens.
Figure 41 System Name Page
Configuring System
Name Information
The System Name Page includes the following fields:
System Name — Defines the user-defined device name. The field
range is 0-160 characters.
System Location — Defines the location where the system is
currently running. The field range is 0-160 characters.
System Contact — Defines the name of the contact person. The
field range is 0-160 characters.