3Com 3CBLSG48 - Restoring Factory Defaults

CHAPTER 2: USING THE 3COM WEB INTERFACE
34
Restoring Factory
Defaults
The Restore option appears on the Reset Page. The Restore option
restores the device to its factory default settings.
To restore the device:
1 Click Administration > Reset. The Reset Page opens.
Figure 17 Reset Page
The Reset Page contains the following fields:
Initialize with Current IP Address — Resets the device with the
factory default settings, but maintains the current IP Address,
subnet mask, and default gateway address.
Initialize with Default IP Address — Resets the device with the
factory default settings, including the factory default IP Address.
2 Click the Initialize button. The system is restored to factory defaults.