CHAPTER 13: CONFIGURING QUALITY OF SERVICE
152
Defining Queuing
Algorithm
The Queue Setup Page provides two scheduling methods: strict and
weighted round robin (WRR).When QoS mode is disabled in the CoS
Setup page, the scheduling method will be the default setting, WRR.
Monitor users have no access to this page
To configure Queue Settings:
1 Click Device > QoS > Queue. The Queue Setup Page opens.
Figure 80 Queue Setup Page
The Queue Setup Page contains the following fields:
Strict Priority — Process the higher over the lower
queues.
WRR(ratio 1:2:15) — Rotate service among the queues based on
the weights assigned to each queues.
2 Define the fields.
3 Click Apply. The queue is defined, and the device is updated.
To Next Page
Loading...
