CHAPTER 7: AGGREGATING PORTS
105
LAG ports can contain different media types if the ports are operating
at the same speed. Aggregated links can be set up manually or auto-
matically established by enabling LACP on the relevant links. Aggregate
ports can be linked into link-aggregation port-groups. The LACP Port
Setup Page contains fields for modifying LACP LAGs.
1 Click Port > LACP > Port Setup. The LACP Port Setup Page opens.
Figure 52 LACP Port Setup Page
Defining LACP Port
Status — Displays the administrative LACP function. The possible
field values are:
Disabled — Disables the LACP function on the selected ports.
Enabled — Enables the LACP function on the selected ports.
Port Priority — Displays the LACP priority value for the port.
The field range is 0-65535.
Select Ports — Displays the port number to which timeout and
priority values are assigned.
Select All — Allows the user to assign LACP status and port
priority to all ports.
Select None — Removes the ports selected.
2 Define the fields.
3 Click Apply. Link Aggregation is modified, and the application
is updated.
To Next Page
Loading...
