3Com 3CBLSG48 - Viewing Port Details

CHAPTER 6: CONFIGURING PORTS
95
The Port Detail Page displays current port parameters for specific ports.
To view Port Details:
1 Click Port > Administration > Detail. The Port Detail Page
opens.
Figure 45 Port Detail Page
Viewing Port
Details
The Port Detail Page contains the following fields:
Select a Port — Displays the current port settings.
Port State — Indicates the port state. The possible field values are:
Enabled — Enables the port.
Disabled — Disables the port.
PVID — Indicates VLAN ID of this port for untagged packets.
Flow Control — Displays the flow control status on the port.
Operates when the port is in full duplex mode. The possible field
values are:
Enabled — Enables flow control on the port.
Disabled — Disables flow control on the port.