CHAPTER11: CONFIGURING SPANNING TREE
136
Viewing Spanning
Tree
The Spanning Tree Summary Page displays the current Spanning Tree
parameters for all ports.
To view Spanning Tree Summary:
1 Click Device > Spanning Tree > Summary. The Spanning Tree
Summary Page opens.
Figure 71 Spanning Tree Summary Page
The Spanning Tree Summary Page contains the following fields:
Port — The interface for which the information is displayed.
Status— Indicates if STP or RSTP is enabled on the port. The
possible field values are:
Enabled— Indicates that STP or RSTP is enabled on the port.
Disabled — Indicates that neither STP nor RSTP is enabled on
the port.
Path Cost — Indicates the port contribution to the root path cost.
The path cost is adjusted to a higher or lower value, and is used to
forward traffic when a path is re-routed.
To Next Page
Loading...
