CHAPTER 14: MANAGING SYSTEM FILES
174
The Active Image Page allows network managers to select and reset
the Image files.
To upload System files:
1 Click Administration > Firmware Upgrade > Active Image.
The Active Image Page opens.
Figure 97 Active Image Page
Activating Image
Files
The Active Image Page contains the following fields:
Active Image After Reset — The Image file which is active on
the unit after the device is reset. The possible field values are:
Current Image — Activates the current image after the device
is reset.
Backup Image — Activates backup image after the device is reset.
2 Select the active image to be activated after reset.
3 Click Apply. The active image file is defined, and the device is
updated.
To Next Page
Loading...
