CHAPTER 7: AGGREGATING PORTS
101
The Link Aggregation Modify Page includes the following fields:
Select Aggregation to Modify — Selects the Link Aggregation
Group ID to modify.
Selected Ports — Allows the network manager to select ports to
be added or removed from a current aggregation. The selected or
deselected ports are color-coded as follows:
Blue — Displays a member of the modified aggregation.
White — Not a member of any aggregation.
Grey — Displays a member of an existing aggregation or VLAN.
Summary
Group ID — Displays the Link Aggregated Group ID.
Type — Displays the type for link aggregation type the Group ID.
Member Ports — Displays the ports configured to the LAG.
2 Define the fields.
3 Click Apply. Link Aggregation is configured, and the application is
updated.
To Next Page
Loading...
