CHAPTER9: CONFIGURING IP AND MAC ADDRESS INFORMATION
124
The Address Table Summary Page contains the following fields:
State — Filters the list of MAC Addresses displayed according to the
type of MAC Address configuration. Possible values are:
All — Displays all MAC Addresses.
Static — Displays the MAC Addresses that were entered by a
user.
Dynamic — Displays the MAC Addresses that were detected by
the switch.
MAC Address — Displays the current MAC addresses listed in the
MAC address table, filtered by the selected value of the State field.
VLAN ID — Displays the VLAN ID attached to the MAC Address.
State — Displays a table display based on the type of MAC address.
Possible values are:
Static — Indicates the MAC address is statically configured.
Dynamic — Indicates the MAC address is dynamically
configured.
Port Index — Indicates the port through which the address was
learned.
Aging Time —Indicates that the MAC address is aged out or not.
NOAGED — Indicates that the Address Table entry is not aged out.
AGING — Indicates that the Address Table entry is aged out.
To Next Page
Loading...
