CHAPTER 10: CONFIGURING IGMP SNOOPING & QUERY
133
The IGMP Snooping & Query Setup Page contains the following fields:
IGMP Snooping Status — Indicates if IGMP Snooping is enabled
on the device. The possible field values are:
Disabled — Indicates that IGMP Snooping is Disabled on the
device. This is the default value.
Enabled — Indicates that IGMP Snooping is enabled on the
device.
IGMP Query Status — Indicates if IGMP Query is enabled on the
device. The possible field values are:
Disabled — Indicates that IGMP Query is disabled on the device.
This is the default value.
Enabled — Indicates that IGMP Query is enabled on the device.
Select VLAN ID — Specifies the VLAN ID.
IGMP Snooping Status — Indicates if IGMP snooping is
enabled on the VLAN. The possible field values are:
.
Figure 70 IGMP Snooping & Query Setup Page
To Next Page
Loading...
