CHAPTER12: CONFIGURING SNMP
148
The SNMP Traps Remove Page contains the following fields:
Remove — Deletes the currently selected recipient. The possible
field values are:
Checked — Removes the selected recipient from the list of
recipients.
Unchecked — Maintains the list of recipients.
Recipients IP — Defines the IP address to which the traps are sent.
Trap — Displays the trap type. The possible field values are:
SNMP V1 — Indicates that SNMP Version 1 traps are sent.
SNMP V2c — Indicates that SNMP Version 2 traps are sent.
Community String — Defines the community string of the trap
manager.
2 Select the SNMP trap to be deleted.
3 Click Remove. The SNMP trap is deleted, and the device is updated.
Figure 77 SNMP Traps Remove Page
To Next Page
Loading...
