CHAPTER 13: CONFIGURING QUALITY OF SERVICE
154
To configure CoS values to queues:
1 Click Device > QoS > CoS to Queue > Setup. The CoS to
Queue Setup Page opens.
Figure 82 CoS to Queue Setup Page
The CoS to Queue Setup Page contains the following fields:
Restore Defaults — Restores the device factory defaults for
mapping CoS values to a forwarding queue.
Class of Service — Specifies the CoS priority tag values, where
zero is the lowest and 7 is the highest.
Queue — Defines the traffic forwarding queue to which the
CoS priority is mapped.
2 Define the queue number in the Queue field next to the required
CoS value.
3 Click Apply. The CoS value is mapped to a queue, and the device is
updated.
To Next Page
Loading...
