EasyManua.ls Logo

3Com 3CBLSG48 - Page 188

3Com 3CBLSG48
231 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 15: VIEWING STATISTICS
177
Fragments — Displays the number of fragments (packets with
less than 64 octets, excluding framing bits, but including FCS
octets) received on the interface since the device was last refreshed.
Jabbers — Displays the total number of received packets that were
longer than 1518 octets. This number excludes frame bits, but
includes FCS octets that had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range
to detect jabbers is between 20 ms and 150 ms.
Collisions — Displays the number of collisions received on the
interface since the device was last refreshed.
Frames of 64 Bytes — Number of 64-byte frames received on
the interface since the device was last refreshed.
Frames of 65 to 127 Bytes — Number of 65 to 127 byte frames
received on the interface since the device was last refreshed.
Frames of 128 to 255 Bytes — Number of 128 to 255 byte
frames received on the interface since the device was last refreshed.
Frames of 256 to 511 Bytes — Number of 256 to 511 byte
frames received on the interface since the device was last refreshed.
Frames of 512 to 1023 Bytes — Number of 512 to 1023 byte
frames received on the interface since the device was last refreshed.
Frames of 1024 to 1518 Bytes — Number of 1024 to 1518 byte
frames received on the interface since the device was last refreshed.
2 Select a port. The port statistics are displayed.
3 Click Clear All Counters. The port statistics counters are cleared
and the new statistics are displayed.

Table of Contents

Related product manuals