ABOUT THIS GUIDE
This section provides an overview to the User Guide. The User
Guide provides the following sections:
Getting Started — Provides introductory information about the
Switch 2948 and how they can be used in your network. It covers
summaries of hardware and software features.
Using the 3Com Web Interface — Provides information for
using the Web interface including adding, editing, and deleting
device configuration information.
Viewing Basic Settings — provides information for viewing and
configuring essential information required for setting up and
maintaining device settings.
Managing Device Security — Provides information for
configuring both system and network security, including traffic
control, ACLs, and device access methods.
General System Information — Provides information for
configuring general system information including the user-defined
system name, the user-defined system location, and the system
contact person.
Configuring Ports — Provides information for configuring port
settings.
This guide provides information about the Web user interface for
the 3Com® Baseline Switch 2948-SFP Plus. The Web interface is a
network management system that allows you to configure, monitor,
and troubleshoot your switch from a remote web browser. The Web
interface web pages are easy-to-use and easy-to-navigate.
User Guide Overview
To Next Page
Loading...
