CHAPTER 4: MANAGING DEVICE SECURITY
59
Modifying MAC
Based ACLs
The MAC Based ACL Modify Page allows the network administrator to
modify MAC Based ACLs settings.
Monitor users have no access to this page.
1 Click Device > ACL > MAC Based ACL > Modify. The MAC Based
ACL Modify Page opens.
Figure 29 MAC Based ACL Modify Page
The MAC Based ACL Modify Page contains the following fields:
Select ACL — Selects the ACL to be bound.
Select Rule — Indicates the rule for which Access Control Entries
are defined.
Modify
Priority — Indicates the rule priority, which determines which rule
is matched to a packet on a first match basis.
Source MAC Address — Matches the source MAC address to
which packets are addressed to the ACE.
Source Mask — Indicates the source MAC Address wildcard mask.
Wildcards are used to mask all or part of a source address by
specifying which bits are used and which are ignored. A wildcard
To Next Page
Loading...
