CHAPTER 4: MANAGING DEVICE SECURITY
66
Defining IP Based
ACLs
Access Control Lists (ACL) allow network managers to define
classification actions and rules for specific ingress ports. Your switch
supports up to 128 ACLs. Packets entering an ingress port, with an
active ACL, are either admitted or denied entry. ACLs are composed of
access control entries (ACEs) that are made of the filters that determine
traffic classifications. The total number of ACEs that can be defined in
all ACLs together is 128.
Monitor users have no access to this page.
To configure IP Based Access Control Lists:
1 Click Device > ACL > IP Based ACL > Setup. The IP Based ACL
Setup Page opens.
Figure 32 IP Based ACL Setup Page
The IP Based ACL Setup Page contains the following fields:
Selection ACL — Selects the ACL to be bound.
Create ACL — Defines a new user-defined IP based ACL.
To Next Page
Loading...
