CHAPTER 4: MANAGING DEVICE SECURITY
78
The ACL Binding Setup Page contains the following fields:
Select Port(s) — Indicates the ports to be configured.
Select All — Allows the user to assign the ACL to all ports.
Select None — Removes the ports selected.
Bind ACL — Assigns an Access Control List to a port or LAG.
MAC-based ACL — Displays the MAC based ACL to which the
interface is assigned.
IP-based ACL — Displays the IP based ACL to which the inter
face is assigned.
Select ACL — Contains a list of previously defined Access Control
Lists to which the port or LAG can be bound. To bind an ACL to a
LAG, the ACL should be bound to its port members.
2 Define the relevant fields.
3 Click Apply. ACL Binding is defined, and the device is updated.
To Next Page
Loading...
