CHAPTER 4: MANAGING DEVICE SECURITY
82
Modifying
Broadcast Storm
The Broadcast Storm Modify Page allows the network administrator to
modify Broadcast Storm settings.
Monitor users have no access to this page.
1 Click Device > Broadcast Storm > Modify. The Broadcast Storm
Modify Page opens.
Figure 39 Broadcast Storm Modify Page
The Broadcast Storm Modify Page contains the following fields:
Broadcast Mode — Indicates if forwarding Broadcast packet
types is enabled on the interface.
Disabled — Disables broadcast control on the selected port.
Broadcast — Enables broadcast control on the selected port.
Broadcast&Multicast — Enables broadcast and multicast
control on the selected port.
To Next Page
Loading...
