115
■ Duplex — Displays the port duplex mode. This field is configurable
only when the port speed is set to 10M or 100M or 1000M per
second. The possible field values are:
■ Full — The interface supports transmission between the device and
its link partner in both directions simultaneously.
■ Half — The interface supports transmission between the device
and the client in only one direction at a time.
■ Auto — Indicates that port duplex mode is set to an optimal value
based on advertised capabilities.
■ PVID — VLAN ID assigned to untagged frames received on this port.
To Next Page
Loading...
