137
■ Not available for selection — Indicates the interface is not available
for selection.
■ Select All — Allows you to select all ports to be added to the VLAN.
■ Select None — Removes the ports selected.
To add ports to a VLAN
1 Select a VLAN to modify.
2 Select the membership type for the selected ports.
3 Select ports to be added to the selected VLAN.
4 You may select different membership types on multiple ports by repeating
step 2 and step 3.
5 Click . The selected ports are added to the VLAN, and the device
is updated.
To Next Page
Loading...
