3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch - Page 153

153
■ IGMP Query Status — Defines whether IGMP Query is enabled on
the device. The possible field values are:
■ Disabled — Indicates that IGMP Query is disabled on the device.
This is the default value.
■ Enabled — Indicates that IGMP Query is enabled on the device.
VLAN Settings
■ Select VLAN — Specifies the VLAN ID.
■ IGMP Snooping Status — Defines whether IGMP snooping is
enabled on the VLAN. The possible field values are:
■ Disabled — Disables IGMP Snooping on the VLAN.
■ Enabled — Enables IGMP Snooping on the VLAN. This is the
default value.
■ IGMP Query Status — Defines whether IGMP Query is enabled on
the VLAN. The possible field values are:
■ Disabled — Disables IGMP Query on the VLAN. This is the default
value.
■ Enabled — Enables IGMP Query on the VLAN.
VLAN Summary
■ VLAN — Displays the VLAN ID.
■ Snooping Status — Displays the IGMP snooping status for the VLAN.
The possible field values are Enabled and Disabled.
■ Query Status — Displays the IGMP query status for the VLAN. The
possible field values are Enabled and Disabled.
To enable or disable IGMP Snooping or IGMP Query on the device:
1 Select Enable or Disable from the IGMP Snooping Status or IGMP Query
Status list.
2 Click . IGMP Snooping and IGMP Query is enabled or disabled on
the device, and the device is updated.
To enable or disable IGMP Snooping or IGMP Query on a selected VLAN:
1 Enable IGMP Snooping or IGMP Query on the device.
2 Select the VLAN ID from the Select VLAN list.
3 Select Enable or Disable from the IGMP Snooping Status or IGMP Query
Status list.