3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch - Page 166

166 CHAPTER 12: CONFIGURING SNMP
The SNMP Add Page contains the following fields:
Community String
■ Standard — Selects pre-defined community strings. The possible field
values are:
■ public — Displays the pre-defined public community string name.
Fixed at read-only access.
■ private — Displays the pre-defined private community string name.
Fixed at read/write access.
■ User Defined — Defines a user-defined community string name. The
maximum string length is 32 characters, all case sensitive. The
maximum number of strings is 5.
■ Access Level — Defines the access rights of the community. The
possible field values are:
■ Read Only — Management access is restricted to read-only.
Authorized management stations are only able to retrieve MIB
objects.
■ Read Write — Management access is read/write. Authorized
management stations are able to both retrieve and modify MIB
objects.
SNMP Trap
■ IP Address — Defines the IP address to which the traps are sent. A
maximum of 5 recipient destination IP address entries can be defined
■ Community String — Defines the community string of the trap
manager. The maximum string length is 32 characters, all case
sensitive.
■ Version — Specifies the trap type. The possible field values are:
■ 1 — Indicates that SNMP Version 1 traps are sent.
■ 2c — Indicates that SNMP Version 2c traps are sent.
2 Define the relevant fields.
3 Click . The SNMP Communities and SNMP Traps are defined,
and the device is updated.