168 CHAPTER 12: CONFIGURING SNMP
Remove SNMP Trap
■ IP Address — Displays the management station IP address for which
the SNMP community is defined.
■ Community String — Displays the user-defined text string which
authenticates the management station to the device.
■ Version — Displays the trap type. The possible field values are:
■ v1 — Indicates that SNMP Version 1 traps are sent.
■ v2c — Indicates that SNMP Version 2 traps are sent.
2 For each SNMP Community or Trap to be removed, select the table entry.
3 Click . The SNMP Communities and Traps are removed, and the
device is updated.
To Next Page
Loading...
