94 CHAPTER 4: MANAGING DEVICE SECURITY
The IP Based ACL Remove Page contains the following fields:
■ ACL Name — Selects an ACL name from a list of the IP-based ACLs.
■ Remove ACL — Enables the ACL to be removed.
■ Checkbox (unnamed) — When checked, selects the rule for removal.
The top checkbox is used to select all rules for removal.
■ Protocol — Indicates the protocol in the rule to which the packet is
matched.
■ Source Port — Displays the TCP/UDP source port to which the ACL is
matched.
■ Destination Port — Displays the TCP/UDP destination port.
■ Flag Set — Indicates the TCP flag matched to the packet.
■ Source IP Address — Indicates the source IP address.
■ Source Mask — Indicates the source IP address mask.
■ Destination IP Address — Indicates the destination IP address.
■ Destination Mask — Indicates the destination IP address mask.
■ DSCP — Matches the packet DSCP value to the ACL. Either the DSCP
value or the IP Precedence value is used to match packets to ACLs.
■ IP Precedence — Matches the packet IP Precedence value to the ACL.
■ Action — Indicates the ACL forwarding action. The options are as
follows:
■ Permit — Forwards packets which meet the ACL criteria.
■ Deny — Drops packets which meet the ACL criteria.
To remove an IP-based ACL:
1 Select an ACL Name to be removed.
2 Check Remove ACL.
3 Click . The selected ACL is deleted, and the device is updated.
To remove IP-based ACL rules:
1 Select an ACL Name.
2 For each rule to be removed, check the box to the left of the row in the
rules table. To remove all rules, the topmost box may be checked.
3 Click . The selected ACL rules are deleted, and the device is
updated.
To Next Page
Loading...
