ATTENTION: do not leave the hotends heated to high temperatures for more than 15 minutes if there is no material
flow. Otherwise, the material may degrade and block the hotend.
Fan speed - this screen enables smooth adjustment of current power of the printout cooling fans within the range of 1% -
100%.
Auto fan on/off – the option is active by default (on). If this option is deactivated (off), the setting of the fans will be in
compliance with the power set in the printer and the commands resulting from the machine code will be ignored.
Back – return to main MENU.
3.3. Menu structure
The hierarchical structure of the menu is shown and its individual functions are described below. The menu differs depending
on whether the printer is working or not.
The following menus are shown below:
• main menu in the idle mode (fig. 33),
• advanced options menu (fig. 34),
• main menu in the working mode (fig. 35).
To Next Page
Loading...
