User’s Manual
User’s ManualUser’s Manual
User’s Manual
EAP200
EAP200EAP200
EAP200 Enterprise Access Point ENGLISH
21
Copyright © 4IPNET, INC.
Step 4: Configuring Wireless Coverage (VAP-1)
To setup the AP’s wireless access, refer to the following VAP-1 configuration (other VAP configuration
can refer to the same setup steps as done for VAP-1). Click on the Overview tab to proceed.
Virtual AP Overview Page
On this page click the hyperlink in the row and column that corresponds with VAP-1’s State. This will
bring up the following page.
VAP Configuration Page (VAP-1 shown)
To Next Page
Loading...
