User’s Manual
User’s ManualUser’s Manual
User’s Manual
EAP200
EAP200EAP200
EAP200 Enterprise Access Point ENGLISH
22
Copyright © 4IPNET, INC.
The desired VAP profile can be selected from the drop-down menu of Profile Name and VAP-1
configuration will serve as an example for all other VAPs. Before proceeding further, please make
sure that the VAP field is Enable; afterwards, enter an ESSID to represent the WLAN associated with
AP’s VAP-1. It is suggested that Profile Name is used to describe what this particular VAP will be
used for; otherwise, leave it as default. VLAN ID can be chosen at another time. Click SAVE to save
all changes up to this point and Reboot the system to apply these revised settings.
Congratulations!
After reboot, the AP can start to work with these revised settings.
To Next Page
Loading...
