Aprisa SRx User Manual 1.3.0
Single Frequency Operation
The TX and RX frequencies of the base station, repeater station and all the remote stations are on the
same frequency.
To change the TX and RX frequencies:
1. Change the TX and RX frequencies of the remote stations operating from the repeater station to the
new frequency. The radio links to these remote stations will fail.
2. Change the TX and RX frequencies of the repeater station operating from the base station to the new
frequency. The radio links to the repeater station and its remote stations will fail.
3. Change the TX and RX frequencies of the remote stations operating from the base station to the new
frequency. The radio links to these remote stations will fail.
4. Change the TX and RX frequencies of the base station to the new frequency. The radio links to all
stations will restore.
To Next Page
Loading...
