A&D TM-2441 - Page 76

58
Automated night blood pressure display ANBP
The ANBP can specify up to six preset start times for the "1
scope". Refer to "6.2.1. S-BPM Programs" for the "1 scope".
When last start time is the same as first start time, the settings of
start time is finished. Next, specify the measurement count and
interval time for the "1 scope".
First start time 2nd start time 3rd start time
Measurement count Interval time
Example Settings and simplified input
The measurement performs at 22:00 and 4:00.
The start time of section 1 = 4:00
The start time of section 2 = 22:00
The start time of section 3 = 4:00 ................ The same as section 1
The measurement count = 2 times
The interval time = 0:01 minute
4:00
6:00
24:00
00:00
12:00
18:00
22:00