61
8.6.
Attaching the Product to the Patient
8.6.1.
Information for Patients
Explain the following to the patient so that they can use the
recorder safely.
Precautions during the blood pressure measurement
Relax the arm and stay quiet when inflation begins.
Keep the same position throughput the measurement.
Avoid vibration and noise during the measurement.
Blood pressure is measured for approximately 1 minute after
pressurization. Be quiet until measurement finishes. The
measurement process between inflating the cuff to releasing the
air requires up to 170 seconds.
The recorder may re-inflate to measure the blood pressure again
after the end of pressurization. This may be caused by body
motion, etc.
The recorder may start the blood pressure measurement after
approximately 120 seconds when measurement data is invalid
and next measurement is after 8 minutes. This may be caused by
body motion, etc.
The recorder may obstruct vehicle and machine operation. Avoid
vehicle and machine operation while wearing the recorder.
To Next Page
Loading...
