71
8.7.3.
Manual Measurement
Use the manual blood pressure measurement for a tentative test
measurement and immediate blood pressure measurement.
Note
Manual blood pressure measurement can start immediately in a
waiting mode.
The measurement result is stored in the memory.
To measure blood pressure during A-BPM immediately.
(
Manual blood pressure measurement
of A-BPM )
Step
1.
If the indication of the OLED display is hidden, press the
START/STOP or EVENT switch to return to the display of
A-BPM waiting mode. A-BPM waiting mode is a state that
blood pressure is not measured during the interval time.
Step 2.
Press the START/STOP switch during A-BPM waiting mode.
To measure blood pressure during S-BPM immediately.
(
Manual blood pressure measurement
of S-BPM )
Step 1.
If the indication of the LCD panel is hidden, press the
START/STOP or EVENT switch to return to the display of
S-BPM waiting mode.
Step 2.
Press the / switch during S-BPM waiting mode.
The blood pressure measurements of "1 scope" are performed
immediately.
To Next Page
Loading...
