A&D TM-2441 - 6 Blood Pressure Measurement Functions; Automatic Blood Pressure Measurement (A-BPM)

26
6. Blood pressure measurement Functions
The recorder is equipped with automatic blood pressure measurement
(A-BPM) and self blood pressure measurement (S-BPM) and can
store measurement states and measurement results.
6.1. Automatic Blood Pressure Measurement (A-BPM)
When A-BPM is suspended or is not used, set the
AUTO switch to "OFF". If the AUTO switch is left
"ON", the measurement will start at the next start time and
the cuff may burst.
Use the LOCK switch to prevent the AUTO switch
from moving to "OFF" accidentally while A-BPM is used.
The A-BPM function measures the blood pressure at preset
intervals using the built-in clock and stores the measurement
result in the memory.
A-BPM can be started and suspended with the AUTO switch.
Use the LOCK switch to prevent from moving accidentally
while A-BPM is used.
LOCK switch to "LOCK
"
AUTO switch to "OFF" AUTO switch to "ON"
AUTO switch