A&D TM-2441 - Page 43

25
To pair for Bluetooth ® communication.
Step 1. Set the AUTO switch to "OFF".
Step 2. If the indication of the display is hidden, press the START/STOP
or EVENT switch to return to the display of waiting mode.
Step 3. Press and hold the EVENT switch for 6 seconds or more.
The buzzer sounds and Pairing is displayed on the OLED
display.
Step 4. When Bluetooth pairing is complete, the mark is displayed on
the LCD panel.
To suspend Bluetooth ® communication. (Airplane mode)
Step 1. Set the AUTO switch to "OFF".
Step 2. If the indication of the display is hidden, press the START/STOP
or EVENT switch to return to the display of waiting mode.
Step 3. During Bluetooth communication, press and hold the
EVENT switch for 3 seconds or more. The buzzer sounds
and FlightMode is displayed on the OLED display.
Step 4. Airplane mode can be turned on/off using the START/STOP
switch.