A&D TM-2441 - Measurement Result; Displaying Measurement Results; Storing Measurement Results

37
6.3. Measurement Result
6.3.1. Displaying Measurement Results
The monitor function can select "Display ON" or "Display OFF"
command of the measurement result of A-BPM. This function
cannot use for S-BPM.
The content of "Display ON" command includes "Pressure value
during the measurement", "measurement result" and "Error code
for the measurement result".
When " Display OFF " command is selected, the clock is displayed.
The factory settings is set to "Display ON".
Refer to "8.2.2 The Clock and the Monitor Function of
Measurement".
6.3.2. Storing Measurement Results
Data processing of the measurement result
Do not use in a strong electromagnetic field.
The memory capacity for the measurement result is 600 data set.
When the memory is filled, the
mark is displayed and the recorder
cannot perform measurement until data is deleted from the memory.
Note
Delete data in the memory before giving the recorder to a new
patient. We recommend to use the memory data of the recorder for
each person separately. If the recorder memorizes data of multiple
people, data may be difficult to process correctly.