A&D TM-2441 - Using Bluetooth Communication

76
8.8.2. Using Bluetooth ® Communication
A Bluetooth device needs to be paired with a device in order to
communicate with the device. Once the recorder is paired with a
device, devices can automatically communicate.
Note
Be sure to power off all other Bluetoo th devices when pairing.
Multiple devices cannot be paired at the same time.
If the recorder is paired with another device, the first device will be
unpaired.
If devices cannot communicate after pairing, try paring once again.
Bluetooth ® pairing
Step 1. Set the AUTO switch to "OFF".
Step 2. If the indication of the display is hidden, press the
START/STOP or EVENT switch to return to the
display of waiting mode.
Step 3.
Press and hold the EVENT switch for 6 seconds or more.
The buzzer sounds and Pairing is displayed on the OLED
display.
Step 4. When pairing is complete, the mark is displayed on the LCD
panel. If devices cannot be paired, press the EVENT switch to
return to the clock display.