A&D TM-2441 - A-BPM Waiting Mode; Sleep Function and Interval Time

28
6.1.1. A - BPM Waiting Mode
Items to monitor measurement state can be displayed on the
LCD panel while waiting time of A-BPM.
# In waiting mode, the indicators are automatically hidden.
Press any switch to show items.
A-BPM waiting mode is a state that blood pressure is not
measured during the interval time.
6.1.2. Sleep Function and Interval time
Set the sleep mode to "ON" in the preset program.
When the EVENT switch is pressed during A-BPM, the
interval time doubles.
When the EVENT switch is pressed again in A-BPM, the
interval time returns to original length.
Refer to "8.3. A-BPM Preset Programs" for information on how
to set the sleep mode.
T : Interval time
Measurement interval
Remaining time to next start time
Current time
Blood pressure measurement
AUTO switch to "ON"
EVENT switch
EVENT switch
T
T
2T
2T 2T
T T
Store parameters of the sleep mode
Time