A&D TM-2441 - S-BPM Operations

22
5.3.2. S-BPM Operations
To start S-BPM.
Step 1. Select the S-BPM program and store its parameters.
Step 2. Set the AUTO switch to "OFF".
Step 3. Operations are as follows:
S-BPM Programs Operations
Office blood pressure OBP
Automated office blood pressure AOBP
Home blood pressure HBP
Press the
/ switch to
start the preset program
during waiting mode.
Automated night blood pressure ANBP
Automated self blood pressure ASBP
Preset program enters
standby until the "start time"
or "start time of alarm".
To stop S-BPM.
Operations are as follows:
S-BPM Programs Operations
Office blood pressure
OBP
Automated office
blood pressure AOBP
Home blood pressure
HBP
Press the
/ switch to stop blood
pressure measurement.
Automated night
blood pressure ANBP
Automated self
blood pressure ASBP
Press the
/ switch to stop blood
pressure measurement. At next start time, blood
pressure is measured or the buzzer sounds.
#1
If you need to stop the recorder completely,
remove batteries from the recorder or switch to
O B P, A O B P, o r H B P.
#1 : Refer to "6.2.1. S-BPM Programs".