47
Items of S-BPM
Item Factory setting
Program selection Office blood pressure (OBP)
Office blood pressure
OBP
N.A.
Measurement count 2 counts
Automated office blood
pressure AOBP
Interval time 5 minutes
Measurement count 2 counts
Home blood pressure
HBP
Interval time 1 minute
Start time of section 2 hour
Measurement count 2 counts
Automated night blood
pressure ANBP
Interval time 1 minute
Start time of alarm 7 hour, 22 hour
Measurement count 2 counts
Automated self blood
pressure ASBP
Interval time 1 minute
The content of the factory settings
When the / switch is pressed after the AUTO switch
is moved to "OFF", the S-BPM preset program (OBP) is started.
The program (OBP) measures the blood pressure once and
stores the result in the memory.
8.2.2.
The Clock and the Monitor Function of Measurement
The initial settings can be configured using the following methods.
The method to use switches on the recorder.
The method to use
dedicated peripheral
that is connected to the
recorder using the USB cable.
To Next Page
Loading...
