A&D TM-2441 - Page 66

48
Procedure of operation using switches
Step 1. Set the AUTO switch to "OFF".
Step 2. If the indication of the display is hidden, press the START/STOP
or EVENT switch to return to the display of waiting mode.
Step 3. While holding the START/STOP switch, press and hold the
EVENT switch for 6 seconds or more. Display will display on
the OLED display.
Step 4. Operation switches are as follows:
EVENT switch
.................
Change of the current parameter.
START/STOP switch
......
Decision, next item, end of settings.
Thereafter, use these switches in another items.
Step 5. After configuring settings, press the START/STOP switch
to return to waiting mode.
Item OLED Range
Monitor
function
Display
xx
xx = OFF, ON
Year
Clock
Year
xx
xx = 17 to 99. Last two digits of year.
Month
Clock
Mon.
xx
xx = 1 to 12 month
Day
Clock
Day
xx
xx = 1 to 31 day
Hour
Clock
Hour
xx
xx = 0 to 23 hour
Minute
Clock
Min.
xx
xx = 0 to 59 minutes
Enclosed characters : Factory settings and initial settings when
batteries are consumed completely.