A&D TM-2441 - S-BPM Programs

31
6.2.1. S-BPM Programs
Office blood pressure OBP
When the / switch is pressed, blood pressure is measured
once and is stored in the memory.
Automated office blood pressure AOBP
When the / switch is pressed, AOBP is started.
First, the device is idle for the interval time to allow the patient to relax.
Next, the AOBP performs a "1 scope".
"1 scope" consists of a set of blood pressure measurements and
interval times which are repeated to the number of the
measurement count. The last interval time is omitted.
When the
/ switch is pressed during the "1 scope", the "1
scope" is stopped.
T : Interval time
Press the / switch to start the measurement.
Time
Blood pressure measurement
Press the / switch to start the "1 scope".
T T
Time
T T T
Press the / switch to start the "1 scope".
Press the / switch to stop the "1 scope".
T T
Time
T
T T
Not measured
1 scope Blood pressure measurement