Cabling
Figure 86 TLU81 Front Connectors
5.7 Dummy Fronts
This section describes the dummy fronts in 19" cabinets.
Dummy fronts are installed at all empty positions in the 19" magazines. New
boards can be installed at these positions. Remove the dummy front at the
position were the new board is to be installed and insert the new board.
Note: All empty board positions must be covered with dummy fronts to fulfil
the EMC requirement.
Table 35 Dummy Fronts
Function Product Number
Quantity
Front 20 mm SXK 106 1020/01
1
Front 40 mm SXK 106 1040/01
1
Front 80 mm SXK 106 1080/01
1
1096/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...