Concluding Routines
11 Concluding Routines
Before leaving the installation site, complete the following steps:
• Clean up the site and remove objects like wrapping paper and cable pieces.
• Dispose of waste material according to local regulations.
• Print one copy of the safety document, and place it visible on site, see
the description for SAFETY.
• Place the battery service instruction sheet (included in NTM 144 265 Page
44 ) visible on site.
• Make sure that the warning label ( Section 4.14.5 on page 79 ) is fastened
visible and close to the AC/DC unit.
• Make sure that the warning label ( Section 4.14.6 on page 80 ) is fastened
visible and close to the batteries.
• Make sure that all cables to and from the magazine have stated earth
connections mounted and that no cable shields are damaged.
• Make sure that no internal cables in the magazines are going outside the
magazines containment.
• Make sure that all cabinet doors in the system are closed correctly.
151
6/1531-ASP 113 01 Uen J2 2008-07-17
To Previous Page
Loading...